Supero 2027R-WRF, User Manual

Page: 112 / 132

7-14
SUPERSERVER 2027R-WRF USER'S MANUAL
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are
Enabled
and Disabled.

SCU (Storage Control Unit) Confi guration
Storage Controller Unit
Select Enabled to enable PCH SCU storage devices. The options are Disabled
and
Enabled
.
OnChip SCU Option ROM
Select Enabled to support the onboard SCU Option ROM to boot up the system via
a storage device. The options are Disabled and
Enabled
.
SCU Port 0~CU Port 7
: The AMI BIOS will automatically detect the onboard SCU
devices and display the status of each SCU device as detected.

PCIe/PCI/PnP Confi guration
PCI ROM Priority
Use this feature to select the Option ROM to boot the system when there are
multiple Option ROMs available in the system. The options are EFI Compatible
ROM and
Legacy ROM
.
PCI Latency Timer
Use this feature to set the latency Timer of each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32,
64
, 96,
128, 160, 192, 224 and 248.
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are Enabled and
Disabled
.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and
Disabled
.
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus
Signal Error Event. The options are
Enabled
and Disabled.