© 2020
Step 1 of 1
Order #56343
Locked layer contains
placeholder marks.
Completed Assembly
Light Box
Infill
Infill
Infill
3
1A
1
Transformer
6
M10 Bolt
M8 Bolt
6A
2
2A
4
4
Item
1,1A
2,2A
3
4
5
6,6A
Qty.
1,1
1,1
1
2
2
1,1
Description
46” CEI110 Horizontal Extrusion
40” CEI110 Vertical Extrusion
40” S44 Vertical Extrusion
19.189” Z31 Horizontal Extrusion
19.189” Z33 Horizontal Extrusion
Base Plate
Steps:
1) Assemble extrusions [1] [1A] [2] and [2A] flat on floor. See CEI110
Tool-Less Assembly sheet.
2) Attach base plates [6] to horizontal [1], using M10 bolt washer and wing
nut. Attach base plate [6A] to vertical [3], using M8 bolt.
Note: Base plate [
6A
] stays attached to [
3
], when packing.
3) Connect horizontals [4] and [5] to vertical [2A]. Tighten locks to secure.
4) Insert Infills between horizontals [4] and [5], then secure with vertical [3].
5) Connect lighting power cords and attach transformer.
See
Light Connection
details.
6) Apply SEG graphic to front and blocker fabric to back of assembled Light Box.
See General Information sheet for SEG Graphic Installation detail.
+
+
+
-
-
-
to power
Lights
Male
Male
Female
Female
Transformer
96W / 4A / 24V
Light to Light Connection
Light to Transformer Connection
Maximum of 7 light bars per transformer.
5
5
Power
Break
Power
Break
Keep base plate [
6A
] attached to vertical [
3
], when packing.
VK-0004 Assembly
