![background image](http://html.mh-extra.com/html/supernova/vk-0004/vk-0004_setup-instructions_1404902003.webp)
© 2020
Order #56343
1) Locate channels along the edges of extrusions
2) Insert graphic corners first into channels then center
point of graphic into channels. Allows for proportional
fit around the perimeter of the extrusion.
3) Working from center to corner, slide silicon edge
on graphic into channel.
4) After all edges of graphic have been inserted into
channels, step back and assess graphic fit, make
adjustments where needed.
4
1
3
2
Fold edges over.
Insert into
groove
of frame
SEG Installation