Page 1
Read this manual carefully before installing, operating or
servicing this equipment.
IMPORTANT
Dimensions
A
20 1/4”
B
19 3/4”
C
7 13/16”
D
3 7/8”
E
7”
SAFETY
Personal injury and/or equipment damage may result
if proper safety precautions are not observed.
• Ensure that reel is properly installed before connecting
input and output hoses.
• Bleed fluid/gas pressure from system before servicing
reel.
• Before connecting reel to supply line, ensure that
pressure does not exceed maximum working pressure
rating of reel.
• Remember, even low pressure is very dangerous
and can cause personal injury or death.
• Be aware of machinery and personnel in work area.
• If a leak occurs in the hose or reel, remove system
pressure immediately.
Operating Instructions
Model:
Wall Mounted Spring
Driven Reel
• A high tension spring assembly is contained within the reel.
Exercise extreme caution.
• Pull hose from reel by grasping the hose itself, not the control
valve.
• Ensure that reel, hose, and equipment being serviced
are properly grounded. Use an ohmmeter to check ground
continuity.
• If reel ceases to unwind or rewind, remove system pressure
immediately. Do not pull or jerk on hose!
• Treat and respect the hose reel as any other piece of
machinery, observing all common safety practices.
Fisher Manufacturing Co. • 1900 “O” Street, Tulare, CA 93274
Ph: 800-421-6162 / 559-685-5200 • Fax: 800-832-8238 / 599-685-5222
Part No.75419 Rev.A
75396 35 ft hose with Spray Gun
75397 50 ft hose with Spray Gun
