22 • 23
Den Taster gedrückt halten, um den Scheinwerfer auszuschalten
Pressing the button to switch off the front light
Maintenez la touche enfoncée pour éteindre le phare avant
Houd de knop ingedrukt om de koplamp uit te schakelen
MINI 2 PRO
FERNLICHT •
HIGH BEAM •
FEU DE ROUTE •
GROOT LICHT
Ausschalten mit dem Fernlichttaster •
Switching off with the high beam switch
Désactivation à l’aide de l’interrupteur de feu de route •
Uitschakelen met de grootlichtschakelaar
1 Sec.
2 Sec.
Aus
OFF
Arrêt
Uit
DE EINSTELLEN DES FERNLICHTES
Mit dem Schalter für die Fernlichtfunktion kann die Fern-
lichfunktion mit Ausleuchtung oberhalb der Hell-Dunkel
Grenze des Abblendlichtes zu- und abgeschaltet werden.
Bitte beachten Sie, dass die Fernlichtfunktion entgegen-
kommenden Verkehr blendet und daher immer dann ab-
geschaltet werden muss, wenn Blendgefahr besteht. Das
Abblendlicht verwendet 1 LEDs und hat 5 W Verbrauch.
Die Fernlichtfunktion verwendet 3 zusätzliche LEDs und
hat einen Verbrauch von 10W.
EN
ACTIVATING THE HIGH BEAM
The high beam switch activates and deactivates illumi-
nation above the dipped beam’s light–dark threshold.
Please note that high beams dazzle oncoming drivers and
must therefore be switched off in situations posing this
risk. The dipped beam is generated by 1 x 5 W LED. The
high beam is generated by three additional LEDs and has
a consumption of 10 W.
FR
UTILISATION DU FEU DE ROUTE
Le commutateur du feu de route permet d‘allumer et
d‘éteindre le feu de route au-delà du faisceau lumineux
délimité du feu de croisement. Notez que le feu de route
éblouit les usagers de la route circulant en sens inverse et
qu‘il doit donc toujours être éteint lorsqu‘il existe un ris-
que d‘éblouissement. Le feu de croisement utilise 1 LED
et consomme 5 W. Le feu de route utilise 3 LED supplé-
mentaires et consomme 10 W.
NL
GROOTLICHT INSTELLEN
Met de schakelaar voor de grootlichtfunctie kan de groot-
lichtfunctie met verlichting boven de scheidingslijn van
de dimlichtbundel worden in- en uitgeschakeld. Houd er
rekening mee dat de grootlichtfunctie het tegemoetko-
mende verkeer verblindt en daarom altijd moet worden
uitgeschakeld als er een risico op verblinding bestaat. Het
dimlicht gebruikt 1 LED en heeft een verbruik van 5 W. De
grootlichtfunctie maakt gebruik van 3 extra LED‘s en heeft
een verbruik van 10W.
MINI 2 PRO AUSSCHALTEN •
SWITCH OFF MINI 2 PRO
ÉTEINDRE LE MINI 2 PRO •
MINI 2 PRO UITSCHAKELEN