Chapter 2: Installation
2-5
Mounting the Motherboard in the Chassis
All motherboards have standard mounting holes to fi t different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Make sure that the metal standoffs click in or are screwed in tightly.
Then, use a screwdriver to secure the motherboard onto the motherboard tray.
Note
: some components are very close to the mounting holes. Please take
precautionary measures to prevent damage done to these components when
you install the motherboard into the chassis.
Unscrew and remove the heatsink
1.
screws from the motherboard in the
sequence as shown in the picture on
the right.
Hold the heatsink as shown in the pic-
2.
ture on the right and gently wriggle the
heatsink to loosen it from the CPU. (Do
not use excessive force when wriggling
the heatsink!!)
Once the heatsink is loosened, remove
3.
the heatsink from the CPU socket.
Clean the surface of the CPU and the
4.
heatsink to get rid of the old thermal
grease. Reapply the proper amount
of thermal grease on the surface be-
fore you re-install the CPU and the
heatsink.
