Supermicro X7DCA-3 User Manual Download Page 64

Page: 64 / 90

4-6

X7DCA-3/X7DCA-i User's Manual

4-4 Advanced

Setup

Choose Advanced from the Phoenix BIOS Setup Utility main menu with the arrow

keys. You should see the following display. The items with a triangle beside them

have submenus that can be accessed by highlighting the item and pressing <En-

ter>.

Boot Features

Access the submenu to make changes to the following settings.

QuickBoot Mode

If enabled, this feature will speed up the POST (Power On Self Test) routine by

skipping certain tests after the computer is turned on. The settings are

Enabled

and Disabled. If Disabled, the POST routine will run at normal speed.

QuietBoot Mode

This setting allows you to

Enable

or Disable the graphic logo screen during boot-

up.

ACPI Mode

Use the setting to determine if you want to employ ACPI (Advanced Confi guration

and Power Interface) power management on your system. The options are

Yes

and No.

ACPI Sleep Mode

This feature allows you to decide which ACPI (Advanced Confi guration and Power

Interface) power management mode to use when in the sleep mode. The options

are

, S3 and S1S3.

Summary of Contents for X7DCA-3



























































































Search results

Summary of Contents for X7DCA-3

Reviews:

Related manuals for X7DCA-3

Brands by name

Popular brands

Supermicro X7DCA-3, User Manual

Search results

Summary of Contents for X7DCA-3

Reviews:

Related manuals for X7DCA-3

Brands by name

Popular brands