![Supermicro X6DA3-G2 User Manual Download Page 3](http://html1.mh-extra.com/html/supermicro/x6da3-g2/x6da3-g2_user-manual_1404171003.webp)
iii
Preface
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X6DA3-G2/X6DAi-G2 motherboard. The X6DA3-G2/X6DAi-G2 supports
single or dual Intel
®
Xeon 64-bit processors at a 800 MHz front side bus. Based
on Intel's Xeon EM64T Processor (800 MHz) and the E7525 chipset, the X6DA3-
G2/X6DAi-G2 supports Intel's Hyper- Threading Technology (HT) , the EM64T
Technology, the Enhanced Intel SpeedStep Technology (EIST) and is ideal for high
performance server environments with up to two processors on one system bus.
The
motherboard is intended to be professionally installed.
Manual Organization:
Chapter 1
describes the features, specifi cations and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2
provides hardware installation instructions. Read this chapter when
installing the processor, memory modules and other hardware components into
the system. If you encounter any problems, see
Chapter 3
, which describes
troubleshooting procedures for the video, the memory and the system setup stored
in CMOS.
Chapter 4
includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A
provides BIOS POST Messages.
Appendix B
lists BIOS POST Codes.
Appendix C
lists Software Installation Instructions.
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution:
Instructions to be strictly followed to prevent
catastrophic system failure or to avoid bodily injury.
Warning:
Important information given to ensure proper system installation
or to prevent damage to the components.
(*Note): Note:
Additional Information given to differentiate various models or
to ensure correct system setup.
Summary of Contents for X6DA3-G2
Page 1: ... USER S MANUAL Revision 1 0 SUPER X6DA3 G2 X6DAi G2 ...
Page 9: ...Chapter 1 Introduction 1 3 Figure 1 1 X6DA3 G2 X6DAi G2 Image ...
Page 20: ...1 14 X6DA3 G2 X6DAi G2 User s Manual Notes ...
Page 84: ...A 6 X6DA3 G2 X6DAi G2 User s Manual Notes ...