Supermicro X6DA3-G2, User Manual

Page: 11 / 112

Chapter 1: Introduction
1-5
Jumper Description Default Setting
J3P 3rd PWR Supply Failure Enable Open (Disabled)
JBT1 CMOS Clear (See Chapter 2)
JPAC Audio Enable/Disable Pins 1-2 (Enabled)
JPF Force Power Open (Disabled)
JPL1 Giga-bit LAN Enable/Disable Pins 1-2 (Enabled)
JPS1 SAS Enable/Disable Pins 1-2 (Enabled)(*Note)
JWD Watch Dog Enable Pins 1-2 (Reset)
Connector Description
ATX PWR (J1B4) Primary 24-pin ATX PWR Connector
12V PWR (J1D1, J32) 12V 8-pin PWR/12V 4-pin CPU PWR Connectors
Chassis Intru. (JL1) Chassis Intrusion Header
COM1 (J6)/COM2 (J38) COM1/COM2 Serial Port Connectors
DIMM#1A-#4B Memory (RAM) Slots#(1A,1B, 2A,2B, 3A,3B,4A,4B)
FAN #1-#8 CPU Fans1/2 (Fans 7/8) /Chassis Fans Headers
Floppy (JP8) Floppy Disk Drive Connector
FP CTRL (JF1) Front Panel Control
I
2
C (J24) PWR System Management Bus
IDE1(J3), IDE2(J4) IDE1/2 Hard Disk Drive Connectors
IPMI (J20) IPMI 2.0 Socket
KB/MOUSE (J9) Keyboard/Mouse
Keylock (JK1) Keylock Connection
LAN (JLAN1) G-bit Ethernet Ports
Line_In/Line_Out/Mic Audio Line_In/Line_Out (JC2), Microphone (JC1)
OH LED (JOH1) Overheat LED
Printer (J23) Parallel (Printer) Port
PWR LED/SPKR(JD1) PWR LED (Pins1-3), Speaker (Pins 4-7)
PWR Fault (JP12) Power Fault Connector
PWR Alarm Reset (JAR) PWR Fail Alarm Reset
SATA0/1 (JS1/JS2) Serial ATA0/Serial ATA1 Headers
SAS 0/3,4/7 (JSM1/JSM2) Serial Attached SCSI Connectors(SAS 0-3/4-7)(*Note)
SAS I
2
C (JS3) SAS PWR System Management Bus (*Note)
SAS LEDs (Act#0-Act#7) Onboard SAS Activity and Status LED Indicators(*Note)
SAS LED (JSLED1) Backpanel SAS Activity LED Indicators (*Note)
SMB (J22) System Management Bus Connector
SPKR Internal Buzzer
WOL (JWOL) Wake-on-LAN Header
WOR (JWOR) Wake-on-Ring Header
USB#0-3 (J40) (Back Panel) Universal Serial Bus Ports
USB#4-5,6-7(JD3, JD2) (Front Panel) Universal Serial Bus Headers
( *Note : for the X6DA3-G2 only.)
Quick Reference