Supermicro SUPERSERVER 6028TP-HC0R-SIOM, User Manual

Page: 68 / 142

5-18
SUPERSERVER 6028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL
5-10 Onboard Indicators
IPMI Dedicated LAN Port LEDs
A dedicated IPMI LAN port is located on
the rear I/O panel. The amber LED on
the right side of the port indicates activity,
while the link LED on the left indicates
the speed of the connection. See the
table at right for more information.
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
Link LED Activity LED
IPMI LAN
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State Definition
Link (Left) Green 100 Mbps
Amber 1 Gbps
Activity
(Right)
Amber: Blink-
ing
Active
BMC Heartbeat LED
Status
Color/State Definition
Green:
Blinking
BMC: Normal
BMC Heartbeat LED
A BMC Heartbeat LED is located at
BMC_HB_LED1 on the serverboard.
When this LED is blinking, BMC is
functioning normally. See the table at
right for more information.
Rear UID LED
The rear UID LED is located on the rear
of the serverboard. This LED is used in
conjunction with the rear UID switch to
provide easy identification of a system
that might be in need of service.
Onboard Power LED
The Onboard Power LED is located
at LE6 on the serverboard. When this
LED is on, the system is on. Be sure
to turn off the system and unplug the
power cord before removing or installing
components. See the table at right for
more information.
Onboard PWR LED Indicator
LED States
Color/State Definition
Off
System PWR Off (PWR
cable not connected)
Orange Standby PWR Ready
Green All PWR RAMP Normal
Red One or more PWR Regu-
lators: Failed
UID LED
Status
Color/State Status
Blue: Blinking/On Unit Identified