Supermicro SUPERSERVER 6028TP-HC0R-SIOM, User Manual

Page: 61 / 142

Chapter 5: Advanced Serverboard Setup
5-11
Memory Support for E5-2600 (v4)-based Serverboards
Type
Ranks Per
DIMM and
Data
Width
DIMM Capacity
(GB)
Speed (MT/s); Voltage (V);
Slot Per Channel (SPC) and DIMM Per
Channel (DPC)
1 Slot Per
Channel
2 Slots Per Channel
1DPC 1DPC 2DPC
4Gb 8Gb 1.2V 1.2V 1.2V
RDIMM SRx4 8GB 16GB 2400 2400 2133
RDIMM SRx8 4GB 8GB 2400 2400 2133
RDIMM DRx8 8GB 16GB 2400 2400 2133
RDIMM DRx4 16GB 32GB 2400 2400 2133
LRDIMM QRx4 32GB 64GB 2400 2400 2400
LRDIMM
3DS
8Rx4 64GB 128GB 2400 2400 2133
5-6 Adding PCI Expansion Cards
The 6028TP-HTR/HC0R/HC1R-SIOM includes one preinstalled riser card per node,
designed specifically for use in the -R2K04BP2 2U rackmount chassis.
The RSC-R1UTP-E16R riser supports a single PCI-E 3.0 x16 card on the right side
of the system (when viewed from the rear).
Installing an Expansion Card
1. After powering down the system, remove the PCI slot shield.
2. Fully seat the card into the slot, pushing down with your thumbs evenly on
both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shield protects the serverboard and its components from EMI
and aid in proper ventilation, so make sure it is always in place.