Supermicro SUPERSERVER 6028TP-HC0FR, User Manual

Page: 77 / 142

Chapter 6: Advanced Chassis Setup
6-3
6-3 Chassis Cover
Before operating the chassis for the first time, it is important to remove
the protective film covering the top of the chassis, in order to allow for proper
ventilation and cooling.
Removing the Chassis Cover and Protective Film (Figure 6-2)
1. Remove the two screws which secure the top cover onto the chassis as
shown above.
2. Lift the top cover up and off the chassis.
3.
Peel off the protective film covering the top cover and the top of the chassis
4. Check that all ventilation openings on the top cover and the top of the chassis
are clear and unobstructed.
Figure 6-2. Removing the Chassis Cover
Remove two screws
Check Ventilation
Openings
1
2
1
3
1
4
1
1
Caution: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airflow and prevent
overheating.