Supermicro SUPERSERVER 6028TP-HC0FR, User Manual

Page: 63 / 142

Chapter 5: Advanced Serverboard Setup
5-13
X10DRT-P/PT/PIBF Quick Reference
Jumper Description Default Setting
JBT1 Clear CMOS See Section 5-9
JPB1 BMC Enabled Pins 1-2 (Enabled)
JPG1 VGA Enabled Pins 1-2 (Enabled)
JPL1 GLAN1/GLAN2 Enable Pins 1-2 (Enabled)
JWD1 Watch Dog Pins 1-2 (RST)
Connector Description
COM1 COM Port 1
FAN3/FAN4 System Fan Headers
JF1 Supermicro Proprietary Slot for Add-On Card for Power, Front
Control Panel
JIPMB1 4-pin External BMC I
2
C Header (for an IPMI Card)
JSD1 SATA DOM (Device On Module) Power Connector
JTPM1 TPM (Trusted Platform Module)/Port 80
LAN1/2 Gb Ethernet Ports 1/2
(IPMI) LAN Dedicated IPMI LAN Port
QSFP Quad-channel Small Form-factor Pluggable (QSFP) Transceiver
Connector used as Connect-X3 InfiniBand Port (X10DRT-PIBF)
S-SATA3 SATA DOM (Disk On Module) with Power-pin Connector
(CPU2) Slot1 PCI-E 3.0 x16 Slot supported by CPU2
(CPU2) Slot2 PCI-E 3.0 x8 Slot supported by CPU2
SXB2 I-SATA 0-5/PCI-E 3.0 x8 Slot supported by CPU1
SXB1 S-SATA 0-2/PCI-E 3.0 x16 Slot supported by CPU2
UID SW UID (Unit Identifier) Switch
USB0/1 USB 3.0 Ports
VGA VGA Port
LED State
BMC_HB_LED1 (BMC Heartbeat LED) Green (Blinking): BMC Normal
IB_ACT_LED1* Yellow (Blinking): InfiniBand Active
IB_LINK_LED1* Green (On): InfiniBand On (Link LED)
UID LED1 (Unit Identifier LED) Blue (Blinking): Unit Identified
*X10DRT-PIBF only.