Supermicro SUPERSERVER 6028TP-HC0FR, User Manual

Page: 12 / 142

1-2
SUPERSERVER 6028TP-HC0R/HC0TR/HC0FR USER'S MANUAL
1-2 Serverboard Features
At the heart of the SuperServer 6028TP-HC0R/HC0TR/HC0FR lies the
X10DRT-P/PT/PIBF, a dual processor serverboard based on the Intel®
PCH C612 chipset and designed to provide maximum performance. Four of these
serverboards can be mounted in the -R2K02B chassis.
The sections below cover the main features of the X10DRT-P/PT/PIBF serverboard
(see Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRT-P/PT/PIBF supports single or dual Intel® Xeon® E5-2600 v3 series
processors (Socket R LGA 2011). Please refer to the serverboard description pages
on our web site for a complete listing of supported processors (www.supermicro.
com).
Memory
The X10DRT-P/PT/PIBF has sixteen DIMM slots supporting up to 1024 GB
of LRDIMM (Load Reduced DIMM) or 512 GB of RDIMM (Registered DIMM)
DDR4-2133/1866/1600 MHz registered ECC memory. See Chapter 5 for details.
Note: Check the Supermicro website for the latest memory support information.
SAS
An LSI 3008 controller is included in the system to support three SAS3 hard drives
per node. (RAID 0, 1 and 10 supported). The SAS drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS drives.
Serial ATA
A Serial ATA controller is integrated into the PCH C612 to provide up to a ten-port 6
Gb/s SATA3 subsystem, which is RAID 0, 1, 5 and 10 supported. The SATA drives
are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
PCI Expansion Slots
The SuperServer 6028TP-HC0R/HC0TR/HC0FR has for each node
one (1) PCI Express 3.0 x16 slot (Slot 1) available for use with a riser card.