Supermicro SUPERSERVER 6028R-E1CR16T, User Manual

Page: 52 / 142

5-2
SUPERSERVER 6028TP-DNCR/DNCTR/DNCFR User's Manual
5-2 Connecting Cables
Now that the processors are installed, the next step is to connect the cables to
the serverboard.
Connecting Data Cables
The cables used to transfer data from the peripheral devices have been carefully
routed in preconfigured systems to prevent them from blocking the flow of cooling
air that moves through the system from front to back.
If you need to disconnect any of these cables, you should take care to reroute them
as they were originally after reconnecting them (make sure the red wires connect
to the pin 1 locations). If you are configuring the system, keep the airflow in mind
when routing the cables.