Supermicro SUPERSERVER 6018TR-T, User Manual

Page: 13 / 144

1-3
Chapter 1: Introduction
Onboard Controllers/Ports
One Fast UART 16550 port, a single Infi niBand connector with FDR/QDR support
6018TR-TF only), a VGA (monitor) port, an IPMI dedicated LAN port and two
Ethernet ports, and two USB 2.0 ports (additional one internal USB Type-A
connector is included on the serverboard) are all available on the IO back panel.
Note: For IPMI Confi guration Instructions, please refer to the Embedded BMC
Configuration User's Guide available @ http://www.supermicro.com/support/
manuals/ .
Graphics Controller
The X10DRT-L/LIBF features an integrated ASpeed 2400 BMC Video Controller.
Infi niBand
The server include an FDR (fourteen data rate) speed Infi niBand QSFP connector.
InfiniBand is a scalable serial communications link intended for connecting
processors with high-speed peripherals.
Other Features
Other onboard features that promote system health include onboard voltage
monitors, a chassis intrusion header, auto-switching voltage regulators, chassis and
CPU overheat sensors, virus protection, node manager software and BIOS rescue.
1-3 Server Chassis Features
The following is a general outline of the main features of the SC808 server chassis.
System Power
Each SC808 chassis model includes a high-effi ciency 80-plus Titanium level certifi ed
power supply, rated at 1000 Watts plus one redundant backup power supply.
In the unlikely event your power supply fails, replacement is simple and can be
accomplished without tools.
Note: The power supplies are hot-plug.