Supermicro SUPERSERVER 6014V-M4, User Manual

Page: 54 / 122

5-18
S
UPERSERVER 6014V-M4 User’s Manual
VGA Enable/Disable
JPG1 allows you to enable or disable
the VGA port. The default position is
on pins 1 and 2 to enable VGA. See
the table on the right for jumper set-
tings.
JLAN1/2 Enable/Disable
Change the setting of jumper JPL1
and JPL2 to enable or disable the
JLAN1 and JLAN2 Gb Ethernet ports,
respectively. See the table on the
right for jumper settings. The default
setting is enabled.
JLAN1/2 Enable/Disable
Jumper Settings (JPL1/JPL2)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
PCI Slots to SMB
Jumpers J13 and J15 allow you to con-
nect or disconnect the PCI and PCI-X
slots to the System Management Bus.
The default setting is closed for both
jumpers to enable the connection.
Both connectors must be set the same
(one is for data and one is for clock).
See the table on the right for jumper
settings.
PCI Slots to SMB
Jumper Settings (J13, J15)
Jumper Setting Defi nition
Open Disabled
Closed Enabled
SCSI Controller Enable/
Disable
Jumper JPA1 is used to enable or dis-
able the LSI SCSI controller. The de-
fault setting is on pins 1-2 to enable
SCSI. See the table on the right for
jumper settings.
SCSI Enable/Disable
Jumper Settings (JPA1)
Both Jumpers Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled