Supermicro SUPERSERVER 6014V-M4, User Manual

Page: 3 / 122

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It pro-
vides information for the installation and use of the SuperServer 6014V-M4. Instal-
lation and maintainance should be performed by experienced technicians only.
The SuperServer 6014V-M4 is a high-end single processor rackmount server based
on the SC813MS-420C 1U rackmount server chassis and the Super X6DVA-4G
serverboard. The X6DVA-4G supports single or dual 800 MHz Intel
®
Xeon TM pro-
cessors in 604-pin FC-mPGA4 sockets.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X6DVA-4G serverboard
and the SC813MS-420C chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6014V-M4 into
a rack and check out the server confi guration prior to powering up the system. If
your server was ordered without the processor and memory components, this chap-
ter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface