Supermicro SuperServer 6014H-i, User Manual

Page: 123 / 126

D-1
Appendix D: System Specifications
Appendix D
System Specifications
Processors
Single or dual Intel
®
Xeon EM64T 604-pin processors at a front side
(system) bus speed of 800 MHz
Note: Please refer to the support section of our web site for a complete listing of supported
processors. (http://www.supermicro.com/support/)
Chipset
Intel E7520 chipset
BIOS
4 Mb Phoenix
®
Flash ROM
Memory Capacity
6014H-i2 (X6DHR-iG2): Eight 240-pin DIMM sockets supporting up to 16
GB of low-profile, registered ECC DDR2-400 SDRAM
6014H-i/6014H-Xi (X6DHR-iG/X6DHR-XiG): Eight 184-pin DIMM sockets
supporting up to 16 GB of low-profile, registered ECC DDR333 SDRAM or
32GB of low-profile, registered ECC DDR266 SDRAM
Note: Interleaved memory - requires memory to be installed two at a time. See the memory section
in Chapter 5 for details.
Peripheral Drive Bays
One (1) 3.5" slim floppy drive
One (1) slim CD-ROM drive
Three (3) 3.5 x 1" drive bays (for IDE drives)
Expansion Slots
6014H-i2: one standard PCI-X card of any speed and one low-profile PCI-
X card (100 or 66 MHz only)
or (with optional riser cards sold
separately) two x8 PCI-Express cards.
6014H-i: one standard PCI-X card and one low-profile PCI-X card of any
speed
or (with optional riser cards sold separately) one x8 PCI-Express
and one x4 PCI-Express card.
6014H-Xi: two (one standard, one low-profile) PCI-X cards of any speed.