Supermicro SuperServer 6011D, User Manual

Page: 71 / 102

Chapter 7: Award BIOS
7-11
BIOS
When the above menu appears, select the items and press the <Enter> key
to display the options:
[Onboard FDC controller]
Select "Enabled", if your system has a floppy disk controller (FDC) installed
on the main board and you wish to use it. The settings are "Enabled" and
"Disabled." The default setting is "Enabled."
[Onboard Serial Port 1/Port 2]
This option allows the user to set the address and the corresponding IRQ
for the Serial Port1 and Serial Port 2. The settings are "Disabled" , "3F8/
IRQ4", "2F8/IRQ3", "3E8/IRQ4", "2E8/IRQ3", and "Auto ." The default setting
for Serial Port1 is "3F8/IRQ4" and the defualt for Port 2 is is "2F8/IRQ3."
[UART Mode Select]
This option allows the user to select the UART mode for BIOS. The settings
are "IrDA", "ASKIR", and "Normal". The default setting is "Normal".
[RxD, TxD Active]
This option allows the user to set the settings for
the function of "RxD,
TxD Active
." The settings are "Hi, Hi", "Hi, Lo", "Lo, Hi", and "Lo, Lo." The
default setting is "Hi, Lo."
[IR Transmission Delay]
If "Enabled", the transmssion of IR (Infra-Red) Signals will be delayed. The
settings are "Enabled" and "Disabled." The default setting is "Enabled."