Supermicro SuperServer 5038MR-H8TRF, User Manual

Page: 55 / 133

Chapter 5: Advanced Serverboard Setup
5-7
5-4 Installing Memory
Memory Support
The X10SRD-F supports up to 256 GB of DDR4 ECC LRDIMM and RDIMM at
1333/1600/2133 MHz in four DIMM slots. For best performance, install memory
modules of the same type and same speed in the slots as indicated. For the latest
memory updates, refer to the Supermicro website at
www.supermicro.com/products/
motherboard .
Memory Population Guidelines
When installing memory modules, the DIMM slots should be populated in the
following order: DIMMA1, DIMMB1, DIMMC1 and DIMMD1.
•
Always use DDR4 DIMM modules of the same size, type and speed.
•
Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed
of the slowest DIMM.
•
The motherboard will support one DIMM module or three DIMM modules
installed. For best memory performance, install DIMM modules in pairs.
Recommended Population (Balanced)
DIMMA1
Slot
DIMMB1
Slot
DIMMC1
Slot
DIMMD1 Slot Total System
Memory
2GB 2GB 4GB
2GB 2GB 2GB 2GB 8GB
4GB 4GB 8GB
4GB 4GB 4GB 4GB 16GB
8GB 8GB 16GB
8GB 8GB 8GB 8GB 32GB
16GB 16GB 32GB
16GB 16GB 16GB 16GB 64GB
32GB 32GB 64GB
32GB 32GB 32GB 32GB 128GB
32GB 32GB 32GB 32GB 128GB
Caution : Exercise care when installing or removing DIMM modules to prevent
damage.