Supermicro SuperServer 5038MR-H8TRF, User Manual

Page: 62 / 133

5-14
S
UPER
S
ERVER 5038MR-H8TRF User's Manual
DOM Power Connectors
Two power connectors for SATA
DOM (Disk On Module) devices are
located at JSD1 and JSD2. These
connectors are used with Supermciro
SuperDOMs to provide backward-
compatible power support to non-
Supermicro SATADOMs that require
external power supply.
DOM PWR
Pin Definitions
Pin# Definition
1 +5V
2 Ground
3 Ground
I-SGPIO2 Header
A Serial-Link General Purpose Input/
Output header (I-SGPIO2) supports
onboard I-SATA 4/5.
I-SGPIO
Pin Definitions
Pin# Definition Pin Definition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 Clock 8 N
NC = No Connection
Unit Identifier Buttons/UID LED
Indicators
A rear unit identifier button (JUIDB2)
is located next to the COM port. The
connection for the front UID button is
located on pin 13 of JF1. The rear UID
LED (LED1) is located next to the rear
UID button, and the front UID LED
connection is located on pin 7 of JF1.
When you press the rear UID button,
both front and rear UID LED indicators
will be turned on. Press the UID button
again to turn off the LEDs. The UID
indicators provide easy identification
of a system unit that may be in need
of service.
Note: UID can also be triggered via
IPMI. For more information on IPMI,
please refer to the IPMI User's Guide
posted on our website.
UID Button
Pin# Definition
1 Ground
2 Ground
3 Button In
4 Button In