Supermicro SuperServer 5019D-RN8TP User Manual Download

Page: 55 / 132

Chapter 5: Software

4. During Windows Setup, continue to the dialog where you select the drives on which to

install Windows. If the disk you want to use is not listed, click on “Load driver” link at the

bottom left corner.

Figure 5-2. Load Driver Link

To load the driver, browse the USB flash drive for the proper driver files.

•

For RAID, choose the SATA/sSATA RAID driver indicated then choose the storage drive
on which you want to install it.

•

For non-RAID, choose the SATA/sSATA AHCI driver indicated then choose the storage
drive on which you want to install it.

Once all devices are specified, continue with the installation.

6. After the Windows OS installation has completed, the system will automatically reboot

multiple times.

Summary of Contents for SuperServer 5019D-RN8TP





































































































































Search results

Summary of Contents for SuperServer 5019D-RN8TP

Reviews:

Related manuals for SuperServer 5019D-RN8TP

Brands by name

Popular brands

Supermicro SuperServer 5019D-RN8TP, User Manual

Search results

Summary of Contents for SuperServer 5019D-RN8TP

Reviews:

Related manuals for SuperServer 5019D-RN8TP

Brands by name

Popular brands