Supermicro SuperServer 5019D-RN8TP User Manual Download

Page: 102 / 132

102

SuperServer 5019D-RN8TP User's Manual

Save as User Defaults

To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables the user to save any changes to the BIOS setup for future use.

Restore User Defaults

To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use

this feature to retrieve user-defined settings that were saved previously.

Boot Override

Other boot options are listed in this section. The system will boot to the selected boot option.

IBA GE Slot 6500 v1584
UEFI: Built-in EFI Shell

Launch EFI Shell from filesystem device

Summary of Contents for SuperServer 5019D-RN8TP





































































































































Search results

Summary of Contents for SuperServer 5019D-RN8TP

Reviews:

Related manuals for SuperServer 5019D-RN8TP

Brands by name

Popular brands

Supermicro SuperServer 5019D-RN8TP, User Manual

Search results

Summary of Contents for SuperServer 5019D-RN8TP

Reviews:

Related manuals for SuperServer 5019D-RN8TP

Brands by name

Popular brands