Supermicro SUPERSERVER 4028GR-TR, User Manual

Page: 124 / 140

7-40
SuperServer 4028GR-TR(T)(2) User’s Manual
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot.
Select Yes, On every reset to erase all system event logs upon each system reboot.
Select No to keep all system event logs after each system reboot. The options are
No ; Yes, On next reset; and Yes, On every reset.
When SEL is Full
This feature allows the user to determine what the AMI BIOS should do when the
system event log is full. Select Erase Immediately to erase all events in the log when
the system event log is full. The options are
Do Nothing
and Erase Immediately.
Note:
After making changes on a setting, be sure to reboot the system for the
changes to take effect.
Custom EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are Disabled, Both,
Error code , and
Progress code.

BMC Network Configuration
The following items will be displayed:
Update IPMI LAN Configuration
Select Yes for the system BIOS to automatically reset the following IPMI settings
at next system boot. The options are
No and Yes.
Configuration Address Source (Available when the item above - Update
IPMI LAN Configuration is set to Yes)
Use this item to select the IP address source for this computer. If Static is selected,
you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, AMI BIOS will search for a DHCP
(Dynamic Host Configuration Protocol) server attached to the network and request
the next available IP address for this computer. The options are Static and
DHCP
.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).