Supermicro SUPERSERVER 4028GR-TR, User Manual

Page: 10 / 140

1-2
SUPERSERVER 4028GR-TR(T)(2) User's Manual
1-2 Motherboard Features
At the heart of the server is the X10DRG-O(T)+-CPU, a dual processor motherboard
based on the Intel PCH C612 chipset. Below are the main features. (See Figure
1-1 for a block diagram)
Processors
The X10DRG-O(T)+-CPU supports dual Intel E5-2600 v3/v4 series processors
in LGA 2011 sockets (Socket R3). Each processor supports dual Intel QuickPath
Interconnect (QPI) links of up to 9.6 GT/s per QPI. Refer to the motherboard
description pages on our web site for a complete listing of supported processors
(
www.supermicro.com ).
Memory
The motherboard has 24 DIMM slots that can support up to 3 TB of Load
Reduced (LRDIMM) or 1.5 TB of Registered (RDIMM) DDR4 ECC, 288-pin, at
2400/2133/1866/1600/1333 MHz. DIMMs up to 64 GB at 1.2V. See Chapter 5 for
details.
Serial ATA
The motherboard supports a ten SATA 3.0 ports. That is four I-SATA, two more
I-SATA with SuperDOM support, and four S-SATA. RAID 0, 1, 5 and 10 can be
enabled.
PCI Expansion Slots
The system includes a daughter board that supports PCI-E expansion cards.
•
Daughterboard X9DRG-O-PCIE (SYS-4028GR-TR[T]) supports eleven PCI-E
3.0 devices, including up to eight double-width graphic processor units (GPUs)
with x16 full signal slots, plus two PCI-E 3.0 x8 and one PCI-E 2.0 x4 expansion
cards.
•
Daughterboard X10DRG-O-PCIE (SYS-4028GR-TR[T]2) supports up to ten
double-width GPUs with x16 full signal slots, or eight double width GPUs with
three PCI-E 3.0 x16 and one PCI-E 3.0 x8 expansion cards
The daughter boards are further described in Chapter 5.
Note that both CPUs must be installed to enable use of all PCI-E slots.