Supermicro SUPERSERVER 4028GR-TR, User Manual

Page: 52 / 140

5-4
SUPERSERVER 4028GR-TR(T)(2) User's Manual
5-4 Installing the Processor and Heatsink
Notes:
•
Always remove the power cord before adding, removing or changing a CPU.
•
When receiving a motherboard without a processor pre-installed, make sure that
the plastic CPU socket cap is in place and none of the socket pins are bent;
otherwise, contact your retailer immediately.
•
If you buy a CPU separately, use only an Intel-certified, multi-directional heatsink.
•
Avoid placing direct pressure to the top of the processor package.
•
Install the processor into the CPU socket before installing the heatsink.
•
Refer to the Supermicro web site for updates on CPU support.
Installing an LGA 2011 Processor
Release the lever labeled "Open 1st"
Installing a CPU
1. There are two levers on the LGA 2011
socket. First press and release the
load lever labeled "Open 1st".
OPEN 1s
t
OPEN 1s
t
Release the lever labeled "Close 1st"
2. Press the second load lever labeled
"Close 1st" to release the load plate
from its locked position.