Supermicro SUPERSERVER 2048U-RTR4, User Manual

Page: 138 / 152

7-48
SuperServer 2048U-RTR4 User’s Manual
When SEL is Full
This feature allows the user to determine what the AMI BIOS should do when the
system event log is full. Select Erase Immediately to erase all events in the log when
the system event log is full. The options are
Do Nothing and Erase Immediately.
Custom EFI Logging Options
Log EFI Status Codes
Select Error Code to log EFI error codes. Select Progress Code to log EFI progress
codes. Select Both to log both error codes and progress codes. The options are
Disabled, Both, Error Code, and Progress Code.
Note : After making changes on a setting, be sure to reboot the system for the
changes to take effect.

BMC Network Configuration
The following items will be displayed:
Update IPMI LAN Configuration
Select Yes for the system BIOS to automatically reset the following IPMI settings
at the next system boot. The options are Yes and
No .
Configuration Address Source (Available when the item above - Update
IPMI LAN Configuration is set to Yes)
Use this item to select the IP address source for this computer. If Static is selected,
you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, AMI BIOS will search for a DHCP
(Dynamic Host Configuration Protocol) server attached to the network and request
the next available IP address for this computer. The options are DHCP and Static.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number is separated by dots and it should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are
6 two-digit hexadecimal numbers.