Supermicro SUPERSERVER 2048U-RTR4, User Manual

Page: 102 / 152

7-12
SuperServer 2048U-RTR4 User’s Manual
Non-Fatal Err (Error) Over
Select Enable to force non-fatal error prorogation to the IIO core error logic for
the port specified by the user. The options are Disable and Enable.
Corr Err (Correctable Error) Over
Select Enable to force correctable error prorogation to the IIO core error logic
for the port specified by the user. The options are Disable and Enable.
L0s Support
When this item is set to Disable, IIO will not put its transmitter in the L0s state.
The default setting is
Disable .

Socket 0 PCIeD01F0 - Port 1A/Socket 0 PCIeD02F0
- Port 2A/Socket 0 PCIeD02F2 - Port 2C/Socket 0
PCIeD03F2 - Port 3A/Socket 0 PCIeD03F2 - Port 3C
PCI-E Port
Select Enable to enable the PCI-E port specified by the user. The options are
Auto
, Enable, and Disable.
Hot Plug Capable
Select Enable to enable hot-plugging support for the PCI-E port specified by
the user to allow the user to replace the device installed on the port without
shutting down the system. The options are
Disable and Enable.
PCI-E Port Link
Select Disable to disable the link that is not involved in training activities, but
its CFG is still active. The options are
Enable and Disable.
Link Speed
Use this item to select the link speed for the PCI-E port specified by the user.
The options are GEN1 (2.5 GT/s), GEN2 (5 GT/s), GEN3 (8 GT/s), and Auto .
PCI-E Port DeEmphasis
Use this item to select the De-Emphasis control setting for a PCI-E port specified
by the user. The options are
-6.0 dB
and -3.5 dB.
*The following items will display:
•
PCI-E Port Link Status
•
PCI-E Port Link Max
•
PCI-E Port Link Speed