Supermicro SUPERSERVER 2048U-RTR4, User Manual

Page: 10 / 152

1-2
S
UPER
S
ERVER 2048U-RTR4 User's Manual
1-2 Motherboard Features
At the heart of the SuperServer 2048U-RTR4 lies the , a quad processor
motherboard based on the Intel E5-4600 v3/v4 Series Grantley platform and the
Intel PCH C612 chipset. Below are the main features of the motherboard. (See
Figure 1-1 for a block diagram of the chipset.)
Processors
The supports up to four Intel Intel E5-4600 v3/v4 Series processors in
Socket R3 LGA2011 sockets. Please refer to our website for a complete listing of
supported processors (www.supermicro.com).
Memory
The has 48 memory slots that can support up to 6 TB of 3DS LRDIMM
(3DS Load Reduced DIMMs), 3TB of LRDIMM (Load-Reduced DIMMs) or 1.5 TB
of RDIMM (Registered DIMMs) DDR4-2400/2133/1866/1600 memory. Please refer
to Chapter 5 for installing memory.
Serial ATA
A SATA controller is integrated into the chipset to provide a ten-port SATA 3.0
subsystem. The I-SATA 4 and I-SATA 5 ports have built-in power pins to support
SuperDOMs (Supermicro's SATA Disk on Module solution). RAID 0, 1, 5 and 10
are supported.
Rear I/O Ports
The rear I/O ports include one COM port, a VGA (monitor) port, two USB 3.0 ports
and one dedicated IPMI LAN port. A UID (Unit Identifier) button is located between
the COM and VGA ports.
Onboard Graphics
The features integrated VGA with the ASpeed 2400 BMC (Baseboard
Management Controller).