Supermicro SuperServer 2028BT-HTR+, User Manual

Page: 16 / 128

SuperServer
2028BT-Hxxx User Manual
2-4
2-4 Rack Mounting Instructions
This section provides information on installing the chassis into a rack unit with the
rails provided. There are a variety of rack units on the market, which may mean
that the assembly procedure will differ slightly from the instructions provided. You
should also refer to the installation instructions that came with the rack unit you are
using.
Note:
This rail will fit a rack between 28" and 33.5" deep.
Overview of the Rack Rails
The package includes two rail assemblies. Each is specifically designed for the left
or right side of the chassis, and so marked. Each rail consists of two sections: a
front section which secures to the front post of the rack and a rear section which
adjusts in length and secures to the rear post of the rack.
Figure 2-1. Rackmount Rail
(Right rail assembly shown)
MCP-290-00144-0N 2U
fixed rail set, quick release, default
for 2,3U
Adjusting the Rails
Each rail assembly has an adjusting screw. Loosen this screw to adjust the length
of the rail to fit the depth of your rack.
Rear Section
Adjusting Screw
Front Section