Supermicro SuperServer 2026GT-TRF, User Manual, Page: 77 / 106

Chapter 7: BIOS
7-5
Wait For 'F1' If Error
When set to Enabled, this feature forces the system to wait until the 'F1' key is
pressed if an error occurs. The options are Disabled and
Enabled .
Hit 'Del' Message Display
Select Enable to display "Press DEL to run Setup" during POST. The options are
Enabled and Disabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt
19 at bootup and allow the drives that are attached to the host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adaptors
will not capture Interrupt 19, and the drives attached to the adaptors will not function
as bootable devices. The options are
Enabled and Disabled.
Power Con fi guration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and
Disabled.
Power Button Function
If this feature is set to Instant_Off, the system will power off immediately as soon
as the user press the power button. If this feature is set to 4_Second_Override,
the system will power off when the user presses the power button for 4 seconds or
longer. The options are
Instant_Off and 4_Second_Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off
and Last State .