Appendix C: System Specifications
129
Appendix C
System Specifications
Processors
Single Intel Xeon 81xx/61xx/51xx/41xx/31xx processor in an Socket P0-LGA3647
Note:
Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel PCH C622 chipset
BIOS
256 Mb AMI® Flash ROM
Memory
Six 240-pin DIMM slots that can support up to 768 GB of 72-bit DDR4 ECC/REG 2666 MHz memory
Note:
See the memory section in Chapter 3 for details and our website for updates to supported memory.
SATA Controller
On-chip (Intel PCH C622) controller
Drive Bays
Supports up to four (4) 3.5" hot-swap drive bays to house eight SATA or SAS drives (SAS requires optional SAS controller
card), supports four SATA drives by default
PCI Expansion Slots
One (1) low-profile, half-length PCI-E 3.0 x8 slot
Two (2) full-height, full-length PCI-E 3.0 x16 slots
Motherboard
X11SPW-TF; proprietary form factor (LxW) 8" x 13" (203.2 mm x 330.2 mm)
Chassis
815TQC-605WB/R504WB; 1U Rackmount, (WxHxD) 17.2 x 1.7 x 25.6 in. (436.88 x 43.18 x 650.24 mm)
System Cooling
Five (5) 4-cm counter-rotating PWM fans, space for one optional additional fans.
Power Supply
Model: PWS-504P-1R
5019P-WTR)
AC Input Voltages: 100-240 VAC
Rated Input Current: 6.1-2.6A
Rated Input Frequency: 50-60 Hz
Rated Output Power: 500 Watts
Rated Output Voltages: +12V (12/40A), +5Vsb (5/3A)
Model: PWS-605P-1H
(5019P-WT)
AC Input Voltages: 100-240 VAC
Rated Input Current: 7.5A
Rated Input Frequency: 50-60 Hz
Rated Output Power: 600 Watts
Rated Output Voltages: +12V (12/0.4A), +5Vsb (5/2.5A)
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 70º C (-40º to 158º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)