Supermicro Supero SUPERSERVER 2027PR-HTFR, User Manual

Page: 86 / 146

6-2
SUPERSERVER 2027PR-HTR/HTFR/HTTR USER'S MANUAL
6-2 Removing the Power Cord
1. Use the operating system to power down the node, following the on-screen
prompts.
2. After the system has completely shut-down, carefully grasp the head of the
power cord and gently pull it out of the back of the power supply.
3. If your system has dual power supplies, remove the cords from both power
supplies.
4. Disconnect the cord from the power strip or wall outlet.
6-3 Control Panel
The control panel is located on the front of the chassis. The LEDs inform you of
system status.
See Chapter 3 for details on the LEDs and the control panel buttons.
Figure 6-1. Front and Rear Chassis Views
SATA Drives (24)
Control Panel
Control Panel
Control Panel
Control Panel
Ethernet Ports
USB Ports VGA Port
IPMI LAN Port
Infi niband Port
(X9DRT-PIBF only)
PCI-E Slot