Supermicro Supero SUPERSERVER 2027PR-HTFR, User Manual

Page: 99 / 146

Chapter 6: Advanced Chassis Setup
6-15
Installing Expansion Cards
1. Use the control panel to power down the computing node, and pull the node
drawer out of the chassis.
2. Open the PCI slot clip in the rear of the node drawer and remove the PCI slot
shield.
3. If the riser card is not already installed, push it into the motherboard slot.
4. Slide the expansion card into the riser card slot and fi t the expansion card
shield into the opening in the rear of the node drawer.
5. Close the PCI slot clip to secure the expansion card shield.
6. Secure the riser card screw.
7. Return the node drawer and power-up.
Figure 6-15. Installing the Expansion Card
Riser Card
Riser Card
Bracket Screw
PCI Slot
Shield
Expander Card