Supermicro SUPERO SUPERSERVER 1028R-WTR Series, User Manual

Page: 11 / 126

Chapter 1
Introduction
1-1 Overview
The SuperServer 1028R-WTR(T) is a high-end server comprised of two main
subsystems: the SC116TS-R706WBP 1U chassis and the X10DRW-i(T) dual
processor serverboard. Please refer to our web site for information on operating
systems that have been certifi ed for use with the system ( www.supermicro.com ).
In addition to the serverboard and chassis, various hardware components have been
included with the SuperServer 1028R-WTR(T), as listed below:
•
Heatsinks:
One Passive CPU heatsink (SNK 0057PSC or SNK-P0047PSC)
One Passive CPU heatsink (SNK-P0057PS)
•
Four 4-cm PWM fans (FAN-0101L4)
•
One air shroud (MCP-310-19002-0N)
•
One 70-cm 20-pin to 20-pin 20-AWG front control cable (CBL-0335L)
•
SATA Accessories:
One SATA backplane (BPN-SAS-116TQ)
Ten drive carriers (MCP-220-00047-0B)
One 77-cm 10-pin to 10-pin 26-AWG two-channel USB cable (CBL-0263L)
Two 29-cm 30-AWG SATA cables (CBL-0483L)
One 27-cm 8-pin to 8-pin round SGPIO cable (CBL-CDAT-0660)
One 40-cm 8-pin to 8-pin round SGPIO cable (CBL-CDAT-0661)
One 61.5-cm 28-AWG SGPIO cable (CBL-CDAT-0662)
Two 31-cm 30-AWG SATA cables (CBL-SAST-0639)
Two 38-cm 30-AWG SATA cables (CBL-SAST-0640)
Two 45-cm 30-AWG SATA cables (CBL-SAST-0641)
Two 55-cm 30-AWG SATA cables (CBL-0488L)
•
One riser card (RSC-R1UW-2E16-O-P)
•
One rackmount kit (MCP-290-00063-0N)
Chapter 1: Introduction
1-1