Supermicro SUPERO SUPERSERVER 1028R-WTR Series, User Manual

Page: 65 / 126

Chapter 5: Advanced Serverboard Setup
5-15
X10DRW-i(T) Jumpers
Jumper Description Default Setting
JBT1 Clear CMOS See Chapter 3
JI
2
C1/JI
2
C2 SMB to PCI-E slots Pins 2-3 (Disabled)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1
GLAN1/GLAN2 Enable (X10DRW-i)
10G_LAN1/10G_LAN2 Enable (X10DRW-iT)
Pins 1-2 (Enabled)
JPME2 Manufacture (ME) Mode Select Pins 1-2 (Normal)
JWD1 Watch-Dog Timer Enable Pins 1-2 (Reset)
X10DRW-i(T) LED Indicators
LED Description State Status
LED1 Rear UID LED Blue: On Unit Identifi ed
LED2 Onboard PWR LED On System Power On
LEDM1 BMC Heartbeat LED Green: Blinking BMC Normal
Note 1: For SXB1A/SXB1B/SXB1C PCI-E slot to work properly, please use an
SMC-proprietary riser card (eg. RSC-R1UW-2E16) in the slot
Note 2: For SXB2 (CPU2 PCI-E 3.0X16) slot to work properly, please use the SMC-
proprietary riser card (PN: RSC-R2UW-2E8R).
Note 3: CPU2 needs to be populated for PCIe SXB2 x16 and SXB1B x16 (lower
left) slots to be functional.
Note 4 : For the latest CPU/memory updates, please refer to our website at http://
www.supermicro.com/products/serverboard .