47
Chapter 3: Installation and Setup
Checking the Temperature of an NVMe Drive
There are two ways to check using the BMC Dashboard.
Checking a Drive
•
BMC Dashboard > Server Health > NVMe SSD –
Shows the temperatures of all NVMe
drives.
•
BMC Dashboard > Server Health > Sensor Reading > NVME_SSD –
Shows the single
highest temperature among all the NVMe drives.
M.2 Storage
The system supports one M.2 solid state drive of form factor 2280.
•
Insert the M.2 card into the M.2 slot, then secure it with the plastic pin at the other end.
Figure 3-9. Installing M.2 SSD
M.2 SSD
Plastic Plug
M.2 Slot
