12
Chapter 1: Introduction
Control Panel Features
Features
Color/State
Description
Power Button
Push briefly to apply or remove primary power to the server. Standby
power is maintained.
Push and hold to reset the BMC. See "
" in Chapter 6.
Power LED
Green
Power on
Amber, flashing
Before the BMC is ready, blinks until every node is ready
Amber, steady
Power off
KVM/UID LED
Blue, steady
Indicates that KVM has been initialized
Blue, flashing
slowly
Unit Identifier indicator (The UID function is activated with a
management program.)
or BMC reboot (see Power Button above)
Blue, flashing
quickly
BMC returning to factory settings (see Power Button above)
NIC LED
Green, flashing
Indicates traffic (Tx and RX data) on the LAN connection to this blade
module
Orange, flashing
Indicates traffic over the network (when present in the system)
System Fail LED
Red
Indicates a fatal error. This may be a memory error, a VGA error or any
other fatal error that prevents the operating system from booting.
Blade Control Panel
Figure 1-3. Control Panel
Power Button
KVM/UID LED
Power LED
NIC LED
System Fail LED
