2-18
S
UPER P4SAA User's Manual
2-9
Installing Software
After all the hardware has been installed, you must first install the operating
system, and then the software drivers. The necessary drivers are all
included on the Supermicro CD that came packaged with your motherboard.
After inserting this CD into your CD-ROM drive, the display shown in Figure
2-5 should appear. (If this display does not appear, click on the My
Computer icon and then on the icon representing your CDROM drive. Finally,
double click on the S "Setup" icon.)
Figure 2-6. Driver/Tool Installation Display Screen
Click the icons showing a hand writing on paper to view the readme files
for each item. Click the computer icons to the right of these
in order from
top to bottom
to install each item one at a time.
After installing each
item, you must reboot the system before moving on to the next
item on the list.
You should install everything here except for the SUPER
Doctor utility and the LAN/SCSI driver diskettes, which are optional. The
Security and Graphics Drivers support multiple languages. Click the arrows
to pull down a menu of choices. The bottom icon with a CD on it allows you
to view the entire contents of the CD.
Note:
The memory size reported in
the device manager may be less than expected because some is used by
the onboard graphics. Higher screen resolutions will take up more of this
memory.
