Supermicro SC816LTS-655BP, User Manual

Page: 63 / 104

Chapter 5: Advanced Serverboard Setup
5-17
ME Manufacturing Mode
Set the jumper to ME Manufacturing
Mode (Maintenance Mode) to enable
this feature.
ME Manufacturing Mode
(JPME2)
Pin# Definition
1-2 Normal (Default)
2-3 ME Manufacturing
Mode
LAN1/LAN2 Enable/Disable
Change the setting of jumper JPL1/
JPL2 to enable or disable the LAN1 /
LAN2 ports, respectively. The default
setting is enabled.
System Type
Change the setting of jumper JPCFG1
to specify the type of system the
motherboard is being used in (Hadoop
or FatTwin). This is used to display
the correct GUI on the web. For the
5017R-iHDP, the default setting is
pins 2-3.
LAN1/2 Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
System Type
Jumper Settings
Jumper Setting Definition
Pins 1-2 FatTwin
Pins 2-3 Hadoop