Supermicro Intelligent Switch, User Manual

Page: 868 / 913

Release :
1.0
868 / 913
33.6 set cos
This command defines the in-profile action by setting a class of service (CoS), Differentiated Services
Code Point (DSCP), or IP-precedence value in the packet.
The no form of the command deletes the configured values.
set {cos <new-cos(0-7)> | ip dscp <new-dscp(0-63)> | ip precedence
<newprecedence( 0-7)>}
no set {cos <new-cos(0-7)> | ip { dscp <new-dscp(0-63)> | precedence
<newprecedence( 0-7)>}}
Syntax Description
cos
- New COS value assigned to the classified traffic
ip dscp
- New DSCP value assigned to the classified traffic
ip precedence
- New IP-precedence value assigned to the classified traffic
Mode
Policy-Map Class Configuration Mode
Example
iss (config-pmap-c)# set cos 5
•
To attach policy maps that contain the following elements to an ingress interface
-
set policy-map class configuration commands must be used. Moreover, the police policy-map
class configuration command can be used to mark down (reduce) the DSCP value at the ingress
interface.
- Access control list (ACL) classification.
- Per-port per-VLAN classification.
Related Commands
class
- Defines a traffic classification for the policy set
policy-map
- Used to enter the policy map configuration mode
class-map
- Creates a class map
show policy-map
- Displays the QoS policy map configuration