Supermicro Intelligent Switch, User Manual

Page: 867 / 913

Release :
1.0
867 / 913
33.5 class
This command defines a traffic classification for the policy to act. The class-map-number that is specified
in the policy map ties the characteristics for that class to the class map and its match criteria, as
configured by using the class-map global configuration command. On execution of the class command,
the switch enters the policy-map class configuration mode
The no form of this command un-maps the class-map from the current policy-map configuration.
class <class-map-number(1-65535)>
no class <class-map-number(1-65535)>
Syntax Description
class-map-number
- Class Map Number
Mode
Policy-Map Configuration Mode
Example
iss (config-pmap)# class 5
•
Differentiated services must have been enabled in the device.
The policy-map global configuration command must be executed prior to using the class
command. After a policy map is specified, the user can either configure a policy for new classes
or modify a policy for any existing classes in that policy map.
The following configuration commands are available from the policy map class configuration
mode
-
set cos
- police
Related Commands
policy-map
- Enters the policy map configuration mode
show policy-map
- Displays the QoS policy maps