Supermicro Intelligent Switch, User Manual

Page: 843 / 913

Release :
1.0
843 / 913
32.39 debug ipv6 ospf
This command sets the trace levels. The no form of the command resets the trace levels.
debug ipv6 ospf [pkt ( [{high | low | hex}] [hp] [ddp] [lrq] [lsu] [lsa] )]
[level ([fn_entry] [fn_exit] [critical] [mem_alloc_succ] [mem_alloc_fail])]
[module ( [ppp] [rtm] [nssa] [rt_aggrg] [adj_formation] [lsdb] [ism] [nsm]
[rt_calc] [interface] [config] )]
no debug ipv6 ospf [ pkt ( [{high | low | hex}] [hp] [ddp] [lrq] [lsu] [lsa]
)] [level ( [fn_entry] [fn_exit] [critical] [mem_alloc_succ] [mem_alloc_fail]
)] [ module ( [ppp] [rtm] [nssa] [rt_aggrg] [adj_formation] [lsdb] [ism]
[nsm] [rt_calc] [interface] [config] ) ]
Syntax Description
pkt
- Packet High Level Dump debug messages
high
- Packet High Level Dump Trace
low
- Packet Low Level Dump Trace
hex
- Packet Hex Dump Trace
hp
- Hello packet Trace
ddp
- DDP packet Trace
lrq
- Link State Request Packet Trace
lsu
- Link State Update Packet Trace
lsa
- Link State Acknowledge Packet Trace
level
- Trace Level Debug Messages
fn_entry
- Function Entry Trace
fn_exit
- Function Exit Trace
critical
- Critical Trace
mem_alloc_succ
- Memory Allocation Success Trace
mem_alloc_fail
- Memory Allocation Failure Trace
module
- OSPFv3 Module Debug Messages
ppp
- Protocol Packet Processing Trace
rtm
- RTM Module Trace
nssa
- NSSA Trace
rt_aggrg
- Route Aggregation Trace
adj_formation
- Adjacency formation Trace
lsdb
- Link State Database Trace