Supermicro H8DGT-HLF, User Manual

Page: 54 / 72

4-6
H8DGT-HLF/HLIBQF Serverboard User’s Manual

SouthBridge Confi guration
OHCI/EHCI HC Device Functions
These settings allow you to either Enable or Disable functions for OHCI or
EHCI bus devices.
USB 2.0 Controller Mode
Use this setting to confi gure the USB 2.0 Controller in either Hi-Speed (480
Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed
Mode) or Disabled (Full Speed Mode).
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy. Disable Legacy
support if there are no USB devices installed in the system. "Auto" disabled
Legacy support if no USB devices are connected. The options are Disabled,
Enabled and Auto .

IDE Confi guration
On Chip SATA Channel
This setting allows you to Enable or Disable the OnChip SATA channel.
On Chip SATA Type
Use this setting to set the On Chip SATA type. Options include
Native IDE , RAID, AMD_AHCI and Legacy IDE.
SATA IDE Combined Mode
This setting allows you to Enable or Disable the SATA IDE combined mode.
PATA Channel Confi guration
This allows you to set PATA channel confi guration. Options include SATA as
Primary or SATA as secondary.

Primary/Secondary/Third/Fourth IDE Master/Slave
LBA/Large Mode
LBA (Logical Block Addressing) is a method of addressing data on a disk
drive. The options are Disabled and Auto .