Supermicro AS-2114GT-DPNR User Manual Download Page 85

Page: 85 / 130

Chapter 6: UEFI BIOS

Use this setting to enable or disable the AIOM OPROM option. The options are Disabled
and

EFI



Network Stack Configuration

Network Stack

This setting allows you to

Enable

or Disable the UEFI Network Stack.

IPv4 PXE Support

This setting allows you to

Enable

or Disable IPv4 PXE boot support. If disabled, IPv4 PXE

boot support will not be available.

IPv4 HTTP Support

This setting allows you to Enable or

Disable

IPv4 HTTP boot support. If disabled, IPv4 HTTP

boot support will not be available.

IPv6 PXE Support

This setting allows you to

Enable

or Disable IPv6 PXE boot support. If disabled, IPv6 PXE

boot support will not be available.

IPv6 HTTP Support

This setting allows you to Enable or

Disable

IPv6 HTTP boot support. If disabled, IPv6 HTTP

boot support will not be available.

PXE Boot Wait Time

This setting allows you to set in a number field the wait time to press the ESC key to abort

the PXE boot. Default is

Media Detect Count

This setting allows you set in a number field the number of times presence of media will be

checked. Default is



USB Configuration

Legacy USB Support

Use this setting to enable USB legacy support. Auto disabled support if no USB devices
are connected. Disable will keep USB devices available only for EFI applications Options
are

Enabled

, Disabled, and Auto.

XHCI Hand-off

Summary of Contents for AS-2114GT-DPNR



































































































































Search results

Summary of Contents for AS-2114GT-DPNR

Reviews:

Related manuals for AS-2114GT-DPNR

Brands by name

Popular brands

Supermicro AS-2114GT-DPNR, User Manual

Search results

Summary of Contents for AS-2114GT-DPNR

Reviews:

Related manuals for AS-2114GT-DPNR

Brands by name

Popular brands