Supermicro 8048B-TR4FT, User Manual

Page: 76 / 135

5-26
SUPERSERVER 8048B-TR4FT USER'S MANUAL
VGA Enable
Jumper JPG1 allows the user to enable
the onboard VGA1/2 ports on the
X10QBi- A I/O module. The default
setting is Enabled. See the table on the
right for jumper settings.
VGA Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
BMC Enable
Jumper JPB1 allows you to enable the
BMC controller on the X10QBi-A I/O
module for IPMI/KVM support. The
default setting is Normal. Refer to the
table on the right for jumper settings.
BMC Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 BMC Enable
Pins 2-3 Normal
TPM Enable
Jumper JPT1 allows the user to enable
TPM (Trusted Platform Module) support
to enhance data security. The default
setting is Enabled. See the table on the
right for jumper settings.
TPM Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
LAN Enable/Disable
JPL1 enables or disables the LAN Port1/
LAN Port2 on the X10QBi-A I/O module.
Refer to the table on the right for jumper
settings. The default setting is Enabled.
LAN Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
Watch Dog Enable/Disable
Watch Dog (JWD1) is a system moni-
tor that can reset the system when a
software application hangs. Close pins
1-2 to reset the system if an applica-
tion hangs. Close pins 2-3 to generate
a non-maskable interrupt signal for the
application that hangs. Refer to the table
on the right for jumper settings. The de-
fault setting is Reset. Watch Dog must
also be enabled in the BIOS.
Watch Dog
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Reset
Pins 2-3 NMI
Open Disabled