Supermicro 8048B-TR4FT, User Manual

Page: 58 / 135

5-8
SUPERSERVER 8048B-TR4FT USER'S MANUAL
Installing a Passive CPU Heatsink
1. Do not apply any thermal grease to the heatsink or the CPU die; the required
amount has already been applied.
2. Place the heatsink on top of the CPU so that the four mounting holes are
aligned with those on the serverboard and the heatsink bracket underneath.
3. Screw in two diagonal screws (i.e., the #1 and the #2 screws) until just snug
(to avoid possible damage to the CPU do not over-tighten the screws.)
4. Finish the installation by fully tightening all four screws.
OPEN 1st
Serverboard
Screw#1
Screw#2
Mounting
Holes
Screw#3
Screw#4
Push down and lock the
lever labeled "Open 1st"
OPEN 1st OPEN
1st
9. Close and lock the "Open 1st"
lever.