Supermicro 6048R-E1CR36N, User Manual

Page: 70 / 79

Chapter 7: BIOS
7-35 7-34
S
UPER
S
TORAGE
S
YSTEM 6048R-E1CR36N User's Manual
7-4 Event Logs
Use this feature to configure Event Log settings.

Change SMBIOS Event Log Settings
This feature allows the user to configure SMBIOS Event settings.
Enabling/Disabling Options
SMBIOS Event Log
Select Enable to enable SMBIOS (System Management BIOS) Event Logging dur-
ing system boot. The options are
Enable and Disable.
Runtime Error Logging Support
Select Enable to support Runtime Error Logging. The options are Enable and Dis-
able . If this item is set to Enable, the following item will be available for configuration:
Memory Corrected Error Enabling (Available when the item above-Runtime
Error Logging Support is set to Enable)
Select Enable for the BIOS to correct a memory error if it is correctable. The options
are Enable and
Disable .
PCI-Ex (PCI-Express) Error Enable
Select Yes for the BIOS to correct errors occurred in the PCI-E slots. The options
are Yes and
No .
Memory Correctable Error Threshold
Use this item to enter the threshold value for correctable memory errors. The default
setting is
10 .
Erasing Settings
Erase Event Log
Select Yes to erase all error events in the SMBIOS (System Management BIOS)
log before an event logging is initialized at bootup. The options are
No and Yes.
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS event log
when the event log is full. Select Do Nothing for the system to do nothing when
the SMBIOS event log is full. The options are
Do Nothing and Erase Immediately.
SMBIOS Event Log Standard Settings
Log System Boot Event
Select Enabled to log system boot events. The options are
Disabled
and Enabled.
MECI (Multiple Event Count Increment)
Enter the increment value for the multiple event counter. Enter a number between
1 to 255. The default setting is
1
.
METW (Multiple Event Count Time Window)
This item is used to determine how long (in minutes) the multiple event counter
should wait before generating a new event log. Enter a number between 0 to 99.
The default setting is
60
.
Note : Please reboot the system for the changes to take effect.

View SMBIOS Event Log
This item allows the user to view the event in the SMBIOS event log. Select this
item and press <Enter> to view the status of an event in the log. The following
categories are displayed:
Date/Time/Error Code/Severity