Supermicro 6048R-DE2CR24L, User Manual

Page: 96 / 126

7-18
SUPERSTORESYSTEM 6048R-DE2CR24L User's Manual

sSATA Confi guration
When this submenu is selected, AMI BIOS automatically detects the presence of
the SATA devices that are supported by the PCH-sSATA controller and displays
the following items:
sSATA Controller
This item enables or disables the onboard SATA controller supported by the Intel
PCH-sSATA controller. The options are Enabled and Disabled.
Confi gure sSATA as
Select IDE to confi gure an sSATA drive specifi ed by the user as an IDE drive.
Select AHCI to confi gure an sSATA drive specifi ed by the user as an AHCI drive.
Select RAID to confi gure an sSATA drive specifi ed by the user as a RAID drive.
The options are IDE, AHCI , and RAID.
*If the item above "Confi gure sSATA as" is set to AHCI, the following items will
display:
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the power
usage of the SATA link. The controller will put the link to a low power state when
the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are Enabled and Disabled.
sSATA Port 0~ Port 1
This item displays the information detected on the installed on the sSATA port.
specifi ed by the user.
•
Model number of drive and capacity
sSATA Port 0~ Port 1
Select Enabled to enable an sSATA port specifi ed by the user. The options are
Disabled and Enabled .
Hot Plug
Select Enabled to enable hot-plugging support for a port specifi ed by the user,
which will allow the user to replace a SATA disk drive installed on this port without
shutting down the system. The options are Enabled and Disabled.
Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a
COMRESET initialization to the device. The options are Enabled and Disabled .